Melbourne and Victoria
Microcement installation in Melbourne, shaped by the surface.
SurfaceLab provides microcement project and installation services for residential and commercial work across Melbourne and Victoria. Every project is assessed around the substrate, its condition, the application and the finish required.

Project types
Residential and commercial microcement projects.
Project services can support suitable floors, walls, bathrooms, kitchens, stairs, furniture and commercial interior applications across Melbourne and Victoria, from a single feature wall to connected interiors.
Residential
New homes, renovations and considered architectural details, including floors, walls, bathrooms and kitchens.
Commercial
Hospitality, retail, workplace and other interior environments, specified around traffic, cleaning and exposure.
Built forms
Suitable benchtops, vanities, stairs, furniture, plinths and custom joinery.
Selected exterior surfaces
Considered case by case, with movement, weather, water, UV exposure, slip and sealer selection assessed first.
Who we work with
Microcement services for homeowners, builders and designers.
Different clients need different information at different stages. SurfaceLab adapts the conversation to the role you play in the project.
Homeowners
Clear explanations of the system, finish and colour guidance, and a quote based on the actual surface rather than a generic rate.
Builders and renovators
Substrate guidance, sequencing with waterproofing and other trades, and a system matched to the stage of construction.
Architects and interior designers
Finish options, sample guidance, technical information and support with specifying the complete build.
Commercial clients
Hospitality, retail and workplace surfaces planned around expected traffic, cleaning regime and the protective system.
How it works
How a Victorian microcement project works.
Every project starts with information about the surface rather than a square-metre rate. The steps below describe the typical path from enquiry to finished surface.
Share your brief
Send the location, application, approximate area, current substrate and the finish you have in mind.
Initial review
SurfaceLab reviews suitability and the likely preparation path, and asks follow-up questions where details are missing.
Substrate assessment
Condition, movement, moisture, joints and transitions are confirmed before a system is specified.
System and quote
Preparation, layers and sealer are specified for the application, and the quote reflects that build.
Installation
The surface is prepared, built layer by layer and sealed for its intended use.
Your brief
What to include in a project brief.
Useful information starts below the finish. The more you can share about the existing surface, the more useful the first response will be.

Location
The suburb or town in Melbourne or regional Victoria where the work will happen.
Application and area
Which surfaces you want finished, such as floors, walls, a bathroom or a benchtop, and the approximate area.
Substrate and condition
What the surface is now, such as concrete, tiles, plasterboard or render, and any known cracking or movement.
Exposure
Whether the surface is in a wet area, a high-traffic space or outdoors.
Stage and finish
Where the project is in construction or renovation, and the look and sheen you are aiming for.
Scope and cost
What shapes the scope and cost of microcement installation.
SurfaceLab does not publish a single square-metre rate, because two surfaces of the same size can need very different builds. These are the factors that most often change the scope.
Substrate condition
Repairs, levelling, crack treatment or removal of unsuitable finishes add preparation before decorative work.
Detailing
Corners, niches, stairs, edges and junctions with other materials take more time than open, flat areas.
Exposure
Wet areas and exterior surfaces need additional coordination, preparation and protection.
Access and programme
Site access, staging and coordination with other trades influence how the work is planned.
Finish and protection
The chosen texture, colour and protective sealer form part of the complete system.

Microcement services across Melbourne and Victoria.
Project and installation services are focused on Melbourne and Victoria. For regional Victorian projects, include the town or area in your brief so suitability can be confirmed early. Recommendations draw on practical installation experience with how microcement behaves on real substrates, from preparation and reinforcement to sealer selection.
Explore
Explore microcement applications.
Read more about each application before you share your brief.
Microcement floors
Stability, reinforcement, traffic and protection.
Microcement walls
Feature walls, kitchens, curves and built forms.
Microcement bathrooms
Decorative finish over compliant waterproofing.
Application gallery
Inspiration across residential and commercial surfaces.
Finishes
Colour, texture and sheen direction.
Microcement FAQs
Answers on substrates, wet areas, finishes and planning.
Questions about Victorian projects
Is microcement suitable for commercial or high-traffic areas?
It may be suitable when the substrate, expected traffic, cleaning regime and protective system are considered together. A commercial floor and a low-contact feature wall do not require the same build. SurfaceLab should review the application and use conditions before materials or project work are specified.
Can microcement be used outdoors?
Selected exterior applications may be possible with an appropriate system. Exterior work needs additional assessment of water, UV exposure, temperature change, substrate movement, drainage, slip requirements and sealer selection. It should not be assumed that an interior wall system can be used unchanged outside.
How durable is microcement?
Durability depends on the complete system, substrate, application quality, expected wear, sealer and maintenance. A floor, benchtop and feature wall experience different conditions and should be specified accordingly. SurfaceLab does not apply one unsupported performance claim to every system or application.
How long does a microcement project usually take?
Timing varies with area, substrate condition, repairs, wet-area coordination, layer sequence, drying conditions and project complexity. SurfaceLab reviews those details before giving a programme rather than publishing one standard duration for every project.
Start a Victorian project conversation.
A clear brief helps SurfaceLab assess suitability and the likely preparation path.

