
Primer
OptionalPorous Surface Primer
Use on porous substrates before reinforcement or microcement build layers.
- Porous substrates
- Interior / exterior
- 1L / 5L
From $29 AUD
1L / 5L
Store
Microcement materials organised in build order, with Australia-wide product supply.
Not sure which products you need?Use Material CalculatorBuild a recommended system from your surfaceMicrocement, resin and sealers brought together for each application, in fixed areas from 10 m². Primer and mesh are sold separately, chosen for your substrate.
Primers and reinforcement for optimal adhesion and performance.

Primer
OptionalUse on porous substrates before reinforcement or microcement build layers.
From $29 AUD
1L / 5L

Adhesion Primer
RequiredUse on non-porous substrates so the first build layer bonds properly.
From $39 AUD
1L / 5L

Reinforcement
RecommendedReinforcement for stress points, transitions, and crack-control support.
$109 AUD
1.2 m × 50 m roll
Build structure and strength with the base powder and required binder.

Part A Powder
RequiredThe structural coat used to build depth and correct the early surface profile.
$129 AUD
16kg

Required Part B Binder
RequiredRequired binder mixed with microcement powders for flexibility, adhesion, and workability.
From $69 AUD
5L / 20L
Texture and appearance layers for the visible microcement finish.

Part A Powder
RequiredIntermediate coat for controlled texture before the final skim layer.
$149 AUD
16kg

Part A Powder
OptionalFinal skim layer for refined texture, softer movement, and finish-ready depth.
$149 AUD
10kg

Required Part B Binder
RequiredRequired binder mixed with Medium and Fine powders in the two-part system.
From $69 AUD
5L / 20L
Initial stain resistance before the final protective topcoat.

Initial Sealer
RequiredInitial sealing layer for moisture resistance and early stain protection.
From $45 AUD
1L / 5L
Final durability and wear protection for the completed surface.

Protective Topcoat
RequiredFinal protective coat for floors and bathrooms, applied over the Penetrating Sealer.
From $59 AUD
1L / 5L

Wall Sealer
OptionalProtective coat for indoor common-area walls. It is not a waterproofing system.
From $35 AUD
1L / 5L

Benchtop Sealer
OptionalSpecialised sealer for benchtops and tables, applied in two coats.
$119 AUD
1L
Durability depends on the complete system, substrate, application quality, expected wear, sealer and maintenance. A floor, benchtop and feature wall experience different conditions and should be specified accordingly. SurfaceLab does not apply one unsupported performance claim to every system or application.
Microcement should not be described as scratch-proof or stain-proof. The protective system can improve wear, stain resistance and cleanability, but performance varies with the sealer, use and maintenance. Spills, dragging objects, abrasive cleaning and concentrated wear can still affect a finished surface.
Use a soft cloth or mop and a cleaner compatible with the installed protective system. Remove spills promptly and avoid abrasive tools. Because care requirements can vary by sealer and application, follow the current care information supplied for the completed SurfaceLab system.
Advanced DIY customers and experienced trades may be able to apply suitable systems with the correct guidance, tools and preparation. Difficult substrates, floors, wet areas, exterior work and high-consequence applications require more technical judgement. DIY suitability should be assessed for the actual surface rather than assumed from the project size.